---
title: "Water and utility monitoring for pharma plants | Ilonnati"
description: "The grades of water a pharmaceutical plant depends on, measured continuously, with its utilities watched alongside."
url: https://ilonnatiinnovations.com/industries/pharmaceuticals/
last_updated: 2026-11-19
publisher: "Ilonnati Innovations Private Limited, Hyderabad, India"
---

Industries: Pharmaceuticals

# Pharmaceutical water, measured grade by grade.

Continuous quality readings for Water for Injections, Purified Water and water for extracts, and the pumps, HVAC and energy behind production, on one platform.

[Contact us](https://ilonnatiinnovations.com/contact/)

**Area**
[Industry and energy](https://ilonnatiinnovations.com/solutions/industry-energy/)

**Use cases**
5 described below

**To start**
A pilot at one site

In the drawing

A production block, stainless water tanks, a purified-water loop with a probe, and an Ilonnati controller.

In short

Water touches almost everything a pharmaceutical plant makes. It is an excipient, the vehicle for reconstitution, part of synthesis and the rinse for vessels, equipment and primary packaging, and each use needs its own grade. Quality, above all microbiological quality, is a constant concern, and plants put considerable resources into their purification systems. Ilonnati measures the quality of each grade continuously where it is made, stored and used, keeps every reading with its time and place, and raises an alert when a reading leaves its band. The pumps, motors and HVAC plant behind production, and the energy they use, are watched on the same platform.

**Use cases**
5

**Measured and run**
6

**Public rules**
2

Why it is hard

## The challenges

What makes pharmaceuticals hard to run without live measurement.

-   ### Several grades, several standards

    Water for Injections, Purified Water and water for extracts each have their own quality requirements, set by pharmaceutical regulators.

-   ### Microbiological quality

    Control of water quality, microbiological quality above all, is a major concern, and a purification system needs constant care to hold it.

-   ### Gaps between samples

    A laboratory sample shows the water at the moment it was drawn; a drift between samples is found only at the next result.

-   ### Records kept by hand

    Quality readings are often logged by hand beside each instrument, which makes review slow and gaps easy to miss.

-   ### Utilities that cannot stop

    Pumps, HVAC and purification plant run around the clock, and a failure among them can halt production.

## What Ilonnati measures and runs

Ilonnati controllers and sensors on the equipment, IoTyX on the screen.

-   ### Water for Injections

    Quality measured continuously where it is generated, stored and drawn for parenteral medicines.

-   ### Purified Water

    Conductivity, pH and dissolved solids on the loop and at points of use, with an alert when a reading leaves its band.

-   ### Water for extracts

    The quality of water drawn to prepare drug extracts, measured and kept on record like the other grades.

-   ### Feed water

    Chlorine, turbidity and dissolved solids in the water entering the purification system, before treatment.

-   ### HVAC and pumps

    Vibration, temperature, voltage and current on the HVAC plant and pumps that production depends on.

-   ### Energy

    Use by source and by machine, set against output, to show the energy behind each unit produced.

## Use cases

Each has a page of its own: the situation, how it works and what is measured.

-   [Pharma water quality Purified Water, Water for Injections and water for extracts, each watched against the quality its grade demands. MeasuresConductivity, pH, Total dissolved solids](https://ilonnatiinnovations.com/use-cases/pharma-water-quality/)
-   [Process water and effluent Fresh, cooling and process water measured where it is drawn and used, and effluent checked before it leaves. MeasuresIntake flow, Cooling and process flow, pH](https://ilonnatiinnovations.com/use-cases/process-water-and-effluent/)
-   [Predictive maintenance Vibration, temperature, voltage and current on pumps, motors and HVAC, so a fault is found before the machine stops. MeasuresVibration, Temperature, Voltage](https://ilonnatiinnovations.com/use-cases/equipment-predictive-maintenance/)
-   [Energy management Grid, solar, wind, battery and generator supply in one view, down to the LT panel and each machine. MeasuresSupply by source, Voltage, Current](https://ilonnatiinnovations.com/use-cases/energy-management/)
-   [Water quality monitoring pH, turbidity, residual chlorine, TDS and nitrate measured continuously, from the treatment works to the far end. MeasurespH, Turbidity, Residual chlorine](https://ilonnatiinnovations.com/use-cases/water-quality-monitoring/)

## The rules and programmes behind it

Public programmes and rules that ask for this kind of measurement. Each links to the body that publishes it.

-   17

    CPCB requires the 17 most polluting industry categories, with common effluent and sewage treatment plants, to stream effluent and emission readings to CPCB and the State Board in real time.

    [CPCB, real-time effluent monitoring guidelines, 2014](https://cpcb.gov.in/upload/thrust-area/revised-GUIDELINES-final-sent-for-publication-on07.11.2014.pdf)
-   Any project that needs a CGWA groundwater permit must fit a digital flow meter with telemetry on every borewell.

    [CGWA guidelines, 2020, Ministry of Jal Shakti](https://cgwb.gov.in/old_website/CGWA/CGWA%20New%20Guidelines%202020.pdf)

## Questions buyers ask

**Not answered here?**

Ask about your own network, plant or campus. An engineer will reply.

[Contact us](https://ilonnatiinnovations.com/contact/)

**Which grades of water can be monitored?**

Water for Injections, Purified Water and water for preparing drug extracts, each against the quality requirements of its grade.

**Does continuous monitoring replace laboratory tests?**

No. It shows how the water behaves between samples; the plant’s laboratory testing, including its microbiological tests, goes on as before.

**Can the plant’s utilities be monitored too?**

Yes. Pumps, motors and HVAC plant are watched for vibration, temperature, voltage and current, and energy is measured by source and by machine, on the same platform.

## Related industries

The same hardware and the same platform, set up for other sites in industry and energy and beyond.

-   [Industry and energy Cement Kilns, crushers, conveyors and mills watched as one plant through a digital twin, with energy measured per machine. 6 use cases](https://ilonnatiinnovations.com/industries/cement/)
-   [Industry and energy Iron and steel Cooling and process water measured by quantity and quality, with the plant’s motors, energy and gas watched alongside. 6 use cases](https://ilonnatiinnovations.com/industries/iron-and-steel/)
-   [Industry and energy Power and energy Fresh water for cooling measured and kept to need, and every source of power on a site monitored down to the panel. 6 use cases](https://ilonnatiinnovations.com/industries/power-and-energy/)
-   [Industry and energy Chemicals and fertilisers Water drawn, used and discharged, effluent checked against its norms, and gas and safety watched across the plant. 6 use cases](https://ilonnatiinnovations.com/industries/chemicals-and-fertilisers/)

## Read next

-   [Solution **Industry and energy**](https://ilonnatiinnovations.com/solutions/industry-energy/)
-   [Industries **Every industry**](https://ilonnatiinnovations.com/industries/)
-   [Use cases **Every use case**](https://ilonnatiinnovations.com/use-cases/)
-   [Contact **Contact us**](https://ilonnatiinnovations.com/contact/)

---

Source: https://ilonnatiinnovations.com/industries/pharmaceuticals/
Published by Ilonnati Innovations Private Limited, Hyderabad, India. Contact: sw@ilonnatiinnovations.com.
Every page of this site, for AI agents: https://ilonnatiinnovations.com/llms.txt
