---
title: "Apartment water tank automation and metering | Ilonnati"
description: "Sumps and rooftop tanks that refill on their own level, each flat metered for pay-per-use bills, and leaks flagged. How it works, step by step, on IoTyX."
url: https://ilonnatiinnovations.com/use-cases/housing-tank-automation/
last_updated: 2026-11-19
publisher: "Ilonnati Innovations Private Limited, Hyderabad, India"
---

Campuses and buildings

# Tanks, meters and leaks in a gated community.

Level sensors in the sump and rooftop tanks, a controller on the pump, a meter at each flat’s inlet, and one screen for the association’s committee and facility manager.

[Contact us](https://ilonnatiinnovations.com/contact/)

**Area**
[Campuses and buildings](https://ilonnatiinnovations.com/solutions/campuses-buildings/)

**In the field**
Ilonnati controllers and sensors

**On the screen**
IoTyX: web, phone, control room

![Illustration of a campus: two office towers with water tanks on their roofs, a cafeteria with a people counter over its door, a laundry block, a caged bank of gas cylinders and the pump that fills the tanks, with Ilonnati controllers.](https://ilonnatiinnovations.com/art/scene/campus.svg?v=dfd8bb0a)

On a typical site

1.  Rooftop tanks
2.  People counter
3.  Gas cylinder bank
4.  Sump pump
5.  Ilonnati controller

In short

A residential community stores water in an underground sump, filled from the municipal supply, a borewell or tankers, and pumps it to rooftop tanks on each block. Ilonnati puts level sensors in the sump and tanks and a controller on the pump, so tanks refill on their own level and the pump does not run the sump dry. An inlet meter records what is received, and a meter at each flat’s inlet records what the flat uses, for pay-per-use bills instead of a share by flat size. Flow that never stops inside a flat or block raises a leak alert, and drinking-water quality can be measured at the sump.

## Who it is for

-   Residents’ welfare and apartment owners’ associations
-   Gated communities and high-rise societies
-   Row-house and villa communities
-   Facility managers running residential estates

Before and after

## What changes

The same job, today and with Ilonnati.

1.  Today: The watchman starts the pump when someone calls about a dry tap. With Ilonnati: Each rooftop tank refills when it falls to its low mark and stops at its high mark.
2.  Today: Rooftop tanks overflow at night until someone hears the water. With Ilonnati: Tank overflow raises an alert on the committee’s and the facility manager’s phones.
3.  Today: Water charges are split by flat size, whatever each flat uses. With Ilonnati: A meter at each flat’s inlet records its use, for pay-per-use bills.
4.  Today: A running cistern or a leaking line goes on for weeks unnoticed. With Ilonnati: Flow that never stops, inside a flat or a block, raises a leak alert.
5.  Today: Nobody knows how much a tanker really delivered. With Ilonnati: A meter at the sump inlet records what each delivery, from mains, borewell or tanker, brings in.

## How it works

From the reading in the field to the action on the screen, and back.

1.  01

    ### Water comes in

    The inlet meter records what reaches the sump from the mains, the borewell or a tanker, and the sump level rises.

2.  02

    ### A tank calls for water

    A rooftop tank falls to its low mark, and the controller starts the pump, as long as the sump has water to give.

3.  03

    ### Full tank, pump stops

    At the tank’s high mark the pump stops. If the sump runs low first, the pump stops and an alert is raised.

4.  04

    ### Each flat is metered

    Meters at each flat’s inlet report its use through the month, and each owner can see their own.

5.  05

    ### A leak shows up

    A flat whose meter never comes to rest, even overnight, raises a leak alert for that flat.

6.  06

    ### Bills from readings

    At month end, each flat’s metered use is the basis of its water bill, with the readings to back it.

## What is measured

Each reading reaches IoTyX through the Ilonnati controller beside the equipment.

| Reading | What it tells you |
| --- | --- |
| Sump level | What is stored below ground, and whether the pump can run |
| Rooftop tank level | When to refill each block’s tank, before it overflows or runs dry |
| Water received | What the mains, borewell or tankers actually delivered |
| Use per flat | Each flat’s consumption, for pay-per-use bills |
| Continuous flow | A leak inside a flat or block that never lets the meter rest |
| TDS, pH and chlorine | Whether drinking water from the sump is within its limits |
| Pump state | When each pump ran, and for how long |

## Industries where it applies

Each industry page sets out its equipment, its rules and the other use cases that run there.

-   [Housing communities 4 use cases](https://ilonnatiinnovations.com/industries/housing-communities/)
-   [Commercial buildings and campuses 5 use cases](https://ilonnatiinnovations.com/industries/commercial-buildings-campuses/)

## Questions buyers ask

**Not answered here?**

Ask about your own network, plant or campus. An engineer will reply.

[Contact us](https://ilonnatiinnovations.com/contact/)

**Do the tank sensors need cables?**

No. The radar level sensor is wireless and runs on its own battery, around seven years when it reports once a day. A gateway on site gathers readings from more than 2,000 such sensors.

**Who sees what?**

The committee and the facility manager see the whole community, and each owner can see their own flat. Only authorised people can start or stop a pump.

**Is drinking-water quality checked too?**

It can be. pH, TDS and residual chlorine can be measured at the sump or the inlet, with an alert when a reading leaves its limit.

**Is it only for apartment blocks?**

No. Row houses and villa communities use the same metering for each house’s use and leak alerts.

## Read next

-   [Solution **Campuses and buildings**](https://ilonnatiinnovations.com/solutions/campuses-buildings/)
-   [Use case **Campus operations**](https://ilonnatiinnovations.com/use-cases/campus-operations/)
-   [Use case **Building water and energy**](https://ilonnatiinnovations.com/use-cases/building-water-and-energy/)
-   [Platform **IoTyX, the platform**](https://ilonnatiinnovations.com/platform/)
-   [Hardware **Controllers and actuators**](https://ilonnatiinnovations.com/hardware/)

---

Source: https://ilonnatiinnovations.com/use-cases/housing-tank-automation/
Published by Ilonnati Innovations Private Limited, Hyderabad, India. Contact: sw@ilonnatiinnovations.com.
Every page of this site, for AI agents: https://ilonnatiinnovations.com/llms.txt
