---
title: "Industrial safety monitoring: gas, noise, air | Ilonnati"
description: "Gas leaks, vibration, noise, air quality and worker exposure measured across a plant, with alerts at the thresholds. How it works, step by step, on IoTyX."
url: https://ilonnatiinnovations.com/use-cases/industrial-safety/
last_updated: 2026-11-19
publisher: "Ilonnati Innovations Private Limited, Hyderabad, India"
---

Industry and energy

# The hazards on a plant floor, measured.

Detectors and wearables measure gas leaks, noise, vibration, air quality and each worker’s exposure, and a risk map shows where on the site the readings are rising.

[Contact us](https://ilonnatiinnovations.com/contact/)

**Area**
[Industry and energy](https://ilonnatiinnovations.com/solutions/industry-energy/)

**In the field**
Ilonnati controllers and sensors

**On the screen**
IoTyX: web, phone, control room

![Illustration of an industrial site: a plant hall, a rotary kiln on its piers, cement silos and a conveyor, a substation with two transformers, a solar array and a wind turbine, with an Ilonnati controller beside each.](https://ilonnatiinnovations.com/art/scene/industry.svg?v=00487f78)

On a typical site

1.  Rotary kiln
2.  Drive motor
3.  Substation
4.  Solar and wind
5.  Ilonnati controller

In short

Most plants measure their hazards at a few points, now and then, with a hand-held instrument. Ilonnati places detectors across the site for gas leaks, vibration, noise and air quality, and wearables that measure the exposure of the people working there. Readings reach IoTyX as they are taken and are placed on a risk map of the site, so a hazard is seen where it is, not only as a number. A reading that crosses its threshold alerts the people responsible at once. Over time, predictive analytics and digital twins of individual assets show where risks are building.

## Who it is for

-   Safety and environment managers
-   Chemical, fertiliser and steel plants
-   Power stations and heavy industry
-   Mines and large industrial sites
-   Plant heads answerable for worker safety

Before and after

## What changes

The same job, today and with Ilonnati.

1.  Today: Gas is checked with a hand-held detector on a round. With Ilonnati: Fixed detectors measure gas continuously and raise an alert as soon as a leak is detected.
2.  Today: Noise is measured during a periodic survey. With Ilonnati: Noise is measured continuously at the places people work.
3.  Today: A worker’s exposure is estimated from where they were rostered. With Ilonnati: Wearables measure each worker’s exposure through the shift.
4.  Today: Readings sit in separate logbooks, one per hazard. With Ilonnati: Every hazard reading sits on one risk map of the site.
5.  Today: A rising pattern is noticed after an incident. With Ilonnati: Trends are analysed, so a hazard that is building is seen early.

## How it works

From the reading in the field to the action on the screen, and back.

1.  01

    ### Map the risks

    The site’s hazards are mapped with its safety team: where gas could leak, where noise is high, where people work.

2.  02

    ### Detectors and wearables

    Fixed detectors are placed at those points, and wearables are issued to the people whose exposure must be measured.

3.  03

    ### Live on the map

    Readings reach IoTyX as they are taken, each shown at its place on the site’s risk map.

4.  04

    ### A threshold is crossed

    Gas near a storage area rises past its threshold, and the shift in-charge and the safety officer are alerted at once.

5.  05

    ### Respond and record

    The area is cleared and checked, and the readings before and after stay on record for the investigation.

6.  06

    ### Patterns over months

    Analysis of the record shows where readings rise again and again, so controls go where the risk is.

## What is measured

Each reading reaches IoTyX through the Ilonnati controller beside the equipment.

| Reading | What it tells you |
| --- | --- |
| Gas leaks | A release near storage, pipework or process equipment, as it starts |
| Noise | Levels at work positions, against the limits that apply |
| Vibration | Machines and structures shaking beyond their usual pattern |
| Air quality | Dust and gases such as CO, NO₂ and SO₂ in the air people breathe |
| Worker exposure | What each person was exposed to through the shift, from a wearable |
| Place on the risk map | Where each reading was taken, and where hazards cluster |

## Industries where it applies

Each industry page sets out its equipment, its rules and the other use cases that run there.

-   [Cement 6 use cases](https://ilonnatiinnovations.com/industries/cement/)
-   [Iron and steel 6 use cases](https://ilonnatiinnovations.com/industries/iron-and-steel/)
-   [Power and energy 6 use cases](https://ilonnatiinnovations.com/industries/power-and-energy/)
-   [Chemicals and fertilisers 6 use cases](https://ilonnatiinnovations.com/industries/chemicals-and-fertilisers/)
-   [Mining 6 use cases](https://ilonnatiinnovations.com/industries/mining/)

## Questions buyers ask

**Not answered here?**

Ask about your own network, plant or campus. An engineer will reply.

[Contact us](https://ilonnatiinnovations.com/contact/)

**What does it measure?**

Gas leaks, vibration, noise, air quality and the exposure levels of workers, through fixed detectors and wearables.

**Who is alerted when a threshold is crossed?**

The people responsible for that area, by push notification, email and in the IoTyX app. Thresholds are set per sensor.

**What is the risk map?**

A geospatial map of the site with every safety reading at the place it was taken, so the team sees where hazards are and where they cluster.

**Does it replace the plant’s existing safety systems?**

It is designed around what the plant already has. What it measures, and how it sits beside existing systems, is agreed for each project.

## Read next

-   [Solution **Industry and energy**](https://ilonnatiinnovations.com/solutions/industry-energy/)
-   [Use case **Cement plant digital twin**](https://ilonnatiinnovations.com/use-cases/cement-plant-digital-twin/)
-   [Use case **Predictive maintenance**](https://ilonnatiinnovations.com/use-cases/equipment-predictive-maintenance/)
-   [Use case **Energy management**](https://ilonnatiinnovations.com/use-cases/energy-management/)
-   [Use case **Gas management**](https://ilonnatiinnovations.com/use-cases/gas-management/)
-   [Platform **IoTyX, the platform**](https://ilonnatiinnovations.com/platform/)
-   [Hardware **Controllers and actuators**](https://ilonnatiinnovations.com/hardware/)

---

Source: https://ilonnatiinnovations.com/use-cases/industrial-safety/
Published by Ilonnati Innovations Private Limited, Hyderabad, India. Contact: sw@ilonnatiinnovations.com.
Every page of this site, for AI agents: https://ilonnatiinnovations.com/llms.txt
