---
title: "Remote pump and reservoir automation | Ilonnati"
description: "Pumps that run on the tank’s level, and valves that deliver a set quantity at a set time, held at the controller. How it works, step by step, on IoTyX."
url: https://ilonnatiinnovations.com/use-cases/pump-and-reservoir-automation/
last_updated: 2026-11-19
publisher: "Ilonnati Innovations Private Limited, Hyderabad, India"
---

Water and utilities

# Pumps that follow the tank, supply on a timetable.

Pumps start and stop on the level of the tank they fill. Valves open at a set time and close when the meter has counted a set quantity. Neither needs anyone at the site.

[Contact us](https://ilonnatiinnovations.com/contact/)

**Area**
[Water and utilities](https://ilonnatiinnovations.com/solutions/water-utilities/)

**In the field**
Ilonnati controllers and sensors

**On the screen**
IoTyX: web, phone, control room

![Illustration of a town water system: treatment works, an elevated reservoir, a pump house, the main with motorised valves, homes with meters, and an Ilonnati controller beside each valve and pump.](https://ilonnatiinnovations.com/art/scene/water.svg?v=b24c5d7c)

On a typical site

1.  Elevated reservoir
2.  Pump set
3.  Motorised valve
4.  Meter at each connection
5.  Ilonnati controller

In short

A pump house run by habit fills full tanks and runs pumps on empty sumps. Ilonnati puts a controller beside the pump and the outlet valve, with a level sensor in the tank. The pump starts at the tank’s low mark and stops at its high mark. For timed supply, a line is given slots, each with a time, a quantity and the days of the week it runs: at the time the valve opens, and when the meter has counted the quantity it closes. The slots are set from a phone and held at the controller. Overflow, late filling and a pump about to run dry raise alerts.

## Who it is for

-   Water boards running pumping stations and reservoirs
-   Town and village water schemes
-   Housing communities with sumps and rooftop tanks
-   Plants that feed boiler, process or cooling tanks
-   Campuses with their own storage

Before and after

## What changes

The same job, today and with Ilonnati.

1.  Today: An operator switches the pump by hand, often after the tank has run dry. With Ilonnati: The pump starts at the tank’s low mark and stops at its high mark, with no one at the switch.
2.  Today: A tank overflows because no one stopped the pump in time. With Ilonnati: Tank overflow raises an alert, and the overflow report shows when and where it happened.
3.  Today: A supply valve is opened by hand and closed by guesswork. With Ilonnati: The valve closes when the meter has counted the quantity set for that slot.
4.  Today: Supply times drift, and nobody records when filling really began. With Ilonnati: A tank whose filling starts late raises an alert, and deviations from the schedule are reported.
5.  Today: A pump runs on an empty sump, and the damage is found later. With Ilonnati: An alert warns when a pump is about to run with too little water to draw.

## How it works

From the reading in the field to the action on the screen, and back.

1.  01

    ### Set the slots

    On the phone, the operator opens a line, here a boiler-tank feed, and sets slots: 07:00 for 8,000 L, 16:00 for 2,000 L, 21:30 for 6,500 L, each on chosen days.

2.  02

    ### Held at the controller

    The slots are sent to the controller beside the valve, and the app shows it connected and powered.

3.  03

    ### The valve opens

    At 07:00 the valve opens. The status turns on, the meter counts up, and the flow curve rises on the phone.

4.  04

    ### The quantity is reached

    At 8,000 litres the valve closes, the status returns to off, and the flow curve falls away.

5.  05

    ### Pumps follow the level

    Elsewhere on the same platform, a sump pump starts when its overhead tank falls to the low mark and stops at the high mark.

6.  06

    ### Exceptions are reported

    Late filling, overflow and schedule deviation appear as alerts and in the daily reports.

## What is measured

Each reading reaches IoTyX through the Ilonnati controller beside the equipment.

| Reading | What it tells you |
| --- | --- |
| Tank and reservoir level | When to start and stop the pump, before an overflow or a dry tank |
| Sump level | Whether the pump has water to draw, before it runs dry |
| Flow and running total | What each slot delivered, and when its set quantity is reached |
| Valve position | Whether the valve opened and closed on schedule, 0 to 100% |
| Pump state | Whether each pump is on, and its running hours |
| Pump house energy | Power used at the pump house, against the water it moved |

## The rules and programmes behind it

Public programmes and rules that ask for this kind of measurement. Each links to the body that publishes it.

-   76%

    In the 2024 national assessment, 76% of rural household taps met all three tests. Damaged pipelines (31.9%) and pump failures (29.6%) were the most common reasons a tap stopped working.

    [Jal Jeevan Mission, Functionality Assessment 2024](https://jaljeevanmission.gov.in/sites/default/files/2025-12/FHTC_National%20Report%202024.pdf)
-   135 L

    The national benchmark for urban water supply is 24-hour supply, 100% metered connections, 135 litres per person per day and non-revenue water of 20%.

    [Service Level Benchmarks, CAG research paper](https://cag.gov.in/uploads/research_paper/RES-8-SLBResearchPaper-05ebe265de5ca12-17221415.pdf)
-   Pey Jal Survekshan gives the most marks for flow measurement to a complete SCADA set-up running from the source to the consumer’s meter.

    [Pey Jal Survekshan Toolkit, MoHUA](https://amrut.mohua.gov.in/uploads/PeyJal_Survekshan_ToolKit.pdf)

## Industries where it applies

Each industry page sets out its equipment, its rules and the other use cases that run there.

-   [Water utilities 4 use cases](https://ilonnatiinnovations.com/industries/water-utilities/)
-   [Rural water 4 use cases](https://ilonnatiinnovations.com/industries/rural-water/)
-   [Housing communities 4 use cases](https://ilonnatiinnovations.com/industries/housing-communities/)
-   [Commercial buildings and campuses 5 use cases](https://ilonnatiinnovations.com/industries/commercial-buildings-campuses/)

## Questions buyers ask

**Not answered here?**

Ask about your own network, plant or campus. An engineer will reply.

[Contact us](https://ilonnatiinnovations.com/contact/)

**How is the pump controlled?**

Through the same controller as the valves. Its relays switch the pump on or off, on the same command as a valve, and the controller confirms each change.

**Can different days have different slots?**

Yes. Each slot has its own time, quantity and days of the week, and a line can hold several slots a day.

**What happens if a valve sticks?**

The valve is given 60 seconds to reach its position and its motor is stopped at 90, so a stuck valve is not driven on. The controller reports the position it reached.

**Is it only for water supply?**

No. The company’s own demonstration feeds a boiler tank in a plant on timed slots, and the same works for process and cooling tanks.

## Read next

-   [Solution **Water and utilities**](https://ilonnatiinnovations.com/solutions/water-utilities/)
-   [Use case **Urban water networks**](https://ilonnatiinnovations.com/use-cases/urban-water-networks/)
-   [Use case **Rural water supply**](https://ilonnatiinnovations.com/use-cases/rural-water-supply/)
-   [Use case **Leak and theft detection**](https://ilonnatiinnovations.com/use-cases/leak-and-theft-detection/)
-   [Use case **Water quality monitoring**](https://ilonnatiinnovations.com/use-cases/water-quality-monitoring/)
-   [Platform **IoTyX, the platform**](https://ilonnatiinnovations.com/platform/)
-   [Hardware **Controllers and actuators**](https://ilonnatiinnovations.com/hardware/)

---

Source: https://ilonnatiinnovations.com/use-cases/pump-and-reservoir-automation/
Published by Ilonnati Innovations Private Limited, Hyderabad, India. Contact: sw@ilonnatiinnovations.com.
Every page of this site, for AI agents: https://ilonnatiinnovations.com/llms.txt
