---
title: "Smart irrigation controlled by soil moisture | Ilonnati"
description: "Sprinklers and drip lines that run on soil moisture, temperature and humidity, not on a fixed timetable. How it works, step by step, on IoTyX."
url: https://ilonnatiinnovations.com/use-cases/smart-irrigation/
last_updated: 2026-11-19
publisher: "Ilonnati Innovations Private Limited, Hyderabad, India"
---

Environment and agriculture

# Irrigation that runs on what the soil needs.

Soil moisture, temperature and humidity sensors in the field, a controller on the pump and the field valves, and irrigation that starts and stops on their readings.

[Contact us](https://ilonnatiinnovations.com/contact/)

**Area**
[Environment and agriculture](https://ilonnatiinnovations.com/solutions/environment-agriculture/)

**In the field**
Ilonnati controllers and sensors

**On the screen**
IoTyX: web, phone, control room

![Illustration of environmental monitoring and farming: an air-quality station, a buoy and a level gauge on a river, fields with soil sensors and a drip main, a polyhouse, and a drone over the forest, with Ilonnati controllers.](https://ilonnatiinnovations.com/art/scene/environment.svg?v=e32d4999)

On a typical site

1.  Air-quality station
2.  River buoy
3.  Soil sensors
4.  Flood level gauge
5.  Ilonnati controller

In short

Temperature, humidity and soil moisture decide how much water a crop needs, and too little and too much both cut yields. Sensors in each field measure all three and report through an Ilonnati controller, which also drives the pump and the valves of the sprinkler or drip system. When a field’s soil dries to its set level, its valve opens; when the soil is wet enough, it closes. A meter on the main can record what each field received. Watering only what the crop needs saves water, the energy to pump it and labour, and less fertiliser is needed.

## Who it is for

-   Farms, plantations and orchards
-   Polyhouses and greenhouses
-   Agriculture and horticulture departments
-   Farmer producer organisations

Before and after

## What changes

The same job, today and with Ilonnati.

1.  Today: Fields are watered on a timetable, whether the soil is dry or not. With Ilonnati: Each field is watered when its soil moisture falls to the level set for the crop.
2.  Today: Someone walks out to start the pump and turn each valve. With Ilonnati: The controller starts the pump and opens each field’s valve, and the farmer sees it on a phone.
3.  Today: A hot, dry day and a humid one get the same water. With Ilonnati: Temperature and humidity are read with soil moisture, so watering follows the weather in the field.
4.  Today: Nobody knows how much water each field actually got. With Ilonnati: A meter on the main records the water sent to each field, day by day.
5.  Today: A pump left running or a burst line goes unnoticed until someone passes. With Ilonnati: Flow where there should be none raises an alert, so a pump left running or a burst line is found.

## How it works

From the reading in the field to the action on the screen, and back.

1.  01

    ### Sensors in the field

    Soil moisture sensors sit in the root zone of each field, with temperature and humidity sensors nearby, all wired to a controller.

2.  02

    ### Readings arrive

    The controller reports their readings to IoTyX, where each field shows on a map with its moisture and its trend.

3.  03

    ### The soil dries

    Moisture in a field falls to its lower mark, the pump starts, and that field’s sprinkler or drip valve opens.

4.  04

    ### Enough water

    When the soil reaches its upper mark, or the meter has counted the set quantity, the valve closes and the pump stops.

5.  05

    ### On the phone

    The farmer sees each field, sets its marks and its timed slots, and can open or close a valve from the app.

6.  06

    ### The season in figures

    Water used, pump hours and soil moisture through the season, field by field, in daily, weekly and monthly reports.

## What is measured

Each reading reaches IoTyX through the Ilonnati controller beside the equipment.

| Reading | What it tells you |
| --- | --- |
| Soil moisture | How much water the root zone holds, and when it is time to irrigate |
| Air temperature | How fast the crop and the soil lose water on a hot day |
| Humidity | With temperature, how much water the crop will draw |
| Water delivered | What each field received, from a meter on the irrigation main |
| Valve position | Which field is being watered, and whether its valve opened |
| Pump state | Whether the pump runs when it should, and for how long |
| Sump or tank level | Water left in the source, before the pump runs dry |

## The rules and programmes behind it

Public programmes and rules that ask for this kind of measurement. Each links to the body that publishes it.

-   \> 80%

    More than 80% of India’s available water goes to irrigation.

    [Per Drop More Crop, PIB backgrounder, 29 August 2026](https://pib.gov.in/PressReleasePage.aspx?PRID=2304480)
-   115 lakh ha

    Per Drop More Crop has brought over 115 lakh hectares under drip and sprinkler irrigation (July 2026).

    [Per Drop More Crop, PIB backgrounder, 29 August 2026](https://pib.gov.in/PressReleasePage.aspx?PRID=2304480)

## Industries where it applies

Each industry page sets out its equipment, its rules and the other use cases that run there.

-   [Agriculture and food 3 use cases](https://ilonnatiinnovations.com/industries/agriculture-and-food/)

## Questions buyers ask

**Not answered here?**

Ask about your own network, plant or campus. An engineer will reply.

[Contact us](https://ilonnatiinnovations.com/contact/)

**Does it work with sprinklers and drip lines?**

Yes. The sensors are connected to the sprinkler or drip system through the controller, with a valve for each field or zone, opened and closed on the readings.

**Can a field still be watered by hand?**

Yes. An authorised user can open or close a field’s valve, or start or stop the pump, from the app. Each command is confirmed and logged.

**Can irrigation run on a timetable as well?**

Yes. A line can be given slots, each with a time, a quantity and the days of the week it runs. The valve opens at the time and closes when the meter has counted the quantity.

**What does it save?**

Water first, and with it the energy to pump water the crop does not need and the labour of running the system by hand. Less fertiliser is needed too. How much depends on the crop and the farm, so no figure is promised in advance.

**What does a farm need for it?**

Power for the controller and the pump, and a mobile signal where the controller stands. Both are checked for each site before installation.

## Read next

-   [Solution **Environment and agriculture**](https://ilonnatiinnovations.com/solutions/environment-agriculture/)
-   [Use case **Air quality monitoring**](https://ilonnatiinnovations.com/use-cases/air-quality-monitoring/)
-   [Use case **Soil and land health**](https://ilonnatiinnovations.com/use-cases/soil-health/)
-   [Use case **Flood and landslide warning**](https://ilonnatiinnovations.com/use-cases/flood-and-landslide-warning/)
-   [Use case **Forest and green cover**](https://ilonnatiinnovations.com/use-cases/forest-and-green-cover/)
-   [Platform **IoTyX, the platform**](https://ilonnatiinnovations.com/platform/)
-   [Hardware **Controllers and actuators**](https://ilonnatiinnovations.com/hardware/)

---

Source: https://ilonnatiinnovations.com/use-cases/smart-irrigation/
Published by Ilonnati Innovations Private Limited, Hyderabad, India. Contact: sw@ilonnatiinnovations.com.
Every page of this site, for AI agents: https://ilonnatiinnovations.com/llms.txt
