Contact us

Industries: Disaster management

Early warning for floods and landslides.

For disaster management authorities and the departments that work with them: rivers, drains, slopes and snow cover measured continuously, on one hazard map, with alerts at the warning mark.

Use cases
1 described below
To start
A pilot at one site
Illustration of environmental monitoring and farming: an air-quality station, a buoy and a level gauge on a river, fields with soil sensors and a drip main, a polyhouse, and a drone over the forest, with Ilonnati controllers.

On a typical site

  1. Air-quality station
  2. River buoy
  3. Soil sensors
  4. Flood level gauge
  5. Ilonnati controller

In short

Floods and landslides give warning, but only to someone measuring in the right place at the right time. Ilonnati places radar level sensors over rivers, drains and reservoirs, and sensors and gauges on slopes known to move, and tracks snow and ice cover through the season. Every point sits on a GIS hazard map in IoTyX, and a reading at its warning mark, or rising suddenly, alerts the officers responsible at once. AI is used for early warning, and a digital twin simulates the disaster response, so plans are tested before the season. The record of each event is kept for the review after it.

Why it is hard

The challenges

What makes disaster management hard to run without live measurement.

What Ilonnati runs here
  • Gauges read by hand

    River levels are read off a staff gauge by whoever is there, and a rise at night may be read too late.

  • Slopes that move slowly

    Ground on a hillside can creep for weeks before it fails, with nothing measuring it.

  • Warnings by phone call

    A warning passes from one officer to the next by phone, and time is lost at each step.

  • Plans tested in the event

    Response plans are written in advance but tested only when the disaster comes.

What Ilonnati measures and runs

Ilonnati controllers and sensors on the equipment, IoTyX on the screen.

  • River and flood level

    Radar sensors over rivers, drains and reservoirs: 0.3–12 m, ±2 mm, with an alarm on a sudden rise.

  • Ground movement

    Sensors on slopes and ground known to move, reporting continuously.

  • Slope stability

    Sensors and gauges on hillsides, with an alert when a reading crosses its threshold.

  • Snow and ice cover

    The extent of snow and ice, tracked through the season.

  • Hazard map

    Every sensor on a GIS map of hazards, with what lies in the path of each.

  • Response simulation

    A digital twin that simulates the disaster response before it is needed.

The rules and programmes behind it

Public programmes and rules that ask for this kind of measurement. Each links to the body that publishes it.

Questions buyers ask

Not answered here?

Ask about your own network, plant or campus. An engineer will reply.

Contact us
01What does a flood warning point need?

A radar level sensor on a wall or pole above the water, running on its own battery, and a route for its readings: a long-range wireless gateway or the mobile network. Both are planned for each site.

02Who is alerted, and how?

The officers responsible for each area, set by role in IoTyX, by push notification, email and in the app.

03Can the sensor survive being under water?

The radar sensor is rated IP68, tested at 1 m under water for 48 hours, and it raises an alarm when the water comes too close to measure.

Related industries

The same hardware and the same platform, set up for other sites in environment and agriculture and beyond.

Tell us what you need to connect, monitor or control

An engineer will reply.