Contact us

Industries: Agriculture and food

Water and soil, measured for the crop.

For farms, plantations, polyhouses and the departments that support them: irrigation driven by soil moisture, temperature and humidity, and soil measured for salinity, nutrients and compaction.

Use cases
3 described below
To start
A pilot at one site
Illustration of environmental monitoring and farming: an air-quality station, a buoy and a level gauge on a river, fields with soil sensors and a drip main, a polyhouse, and a drone over the forest, with Ilonnati controllers.

On a typical site

  1. Air-quality station
  2. River buoy
  3. Soil sensors
  4. Flood level gauge
  5. Ilonnati controller

In short

Too little water and too much both cut yields, and most fields are still watered by habit. Ilonnati connects soil moisture, temperature and humidity sensors to the sprinkler or drip system, so each field is watered when its soil needs it, and less water, pumping energy, fertiliser and labour are spent. Soil sensors add salinity, NPK, contamination and compaction, mapped field by field, with drone surveys for large holdings. Beyond the field, the controller board is designed for greenhouse and hydroponic automation, poultry houses, weather stations and food storage.

Why it is hard

The challenges

What makes agriculture and food hard to run without live measurement.

What Ilonnati runs here
  • Water at the wrong time

    Water scarcity hurts yields, and so does oversupply. A fixed timetable cannot tell a dry week from a wet one.

  • Pumping and labour

    Pumps run longer than the crop needs, and someone has to walk out to start them and turn each valve.

  • Fertiliser by habit

    Without nutrient readings, fertiliser is applied by custom rather than by what each field holds.

  • Land that degrades unseen

    Salinity, compaction and contamination build up slowly, and are found when a crop fails.

What Ilonnati measures and runs

Ilonnati controllers and sensors on the equipment, IoTyX on the screen.

  • Soil moisture

    Water in the root zone of each field, deciding when its valve opens and closes.

  • Temperature and humidity

    Read with soil moisture, to tell how much water the crop will draw.

  • Valves and pumps

    Sprinkler and drip valves and the pump, run by the controller and from a phone.

  • Water delivered

    A meter on the irrigation main can record what each field received.

  • Soil condition

    Salinity, NPK, contamination and compaction, mapped field by field.

  • Drone surveys

    Precision surveys of holdings too large to probe point by point.

The rules and programmes behind it

Public programmes and rules that ask for this kind of measurement. Each links to the body that publishes it.

Questions buyers ask

Not answered here?

Ask about your own network, plant or campus. An engineer will reply.

Contact us
01Does it work in polyhouses and greenhouses?

Yes. Irrigation runs on soil moisture, temperature and humidity under cover as in an open field, and the controller board is designed for greenhouse monitoring and hydroponic automation.

02Can a farmer run it from a phone?

Yes. The IoTyX app shows each field and lets an authorised user open or close a valve or start the pump. Each command is confirmed and logged.

03What does a farm need for it?

Power for the controller and the pump, and a mobile signal where the controller stands. Both are checked for each site before installation.

Related industries

The same hardware and the same platform, set up for other sites in environment and agriculture and beyond.

Tell us what you need to connect, monitor or control

An engineer will reply.