Environment and agriculture
Early warning of rising water and moving ground.
Radar level sensors over rivers and drains, sensors and gauges on unstable slopes, and an alert to the officers responsible as soon as a reading crosses its warning mark.
- In the field
- Ilonnati controllers and sensors
- On the screen
- IoTyX: web, phone, control room
On a typical site
- Air-quality station
- River buoy
- Soil sensors
- Flood level gauge
- Ilonnati controller
In short
A river that rises at night, or a slope that starts to creep, gives little notice to anyone reading gauges by hand. A radar level sensor fixed above the water measures its level without touching it, to within 2 mm, and raises its own alarm at a threshold or on a sudden rise. Sensors and gauges on hillsides report ground movement and slope stability, and snow and ice cover is tracked through the season. IoTyX places every point on a GIS hazard map and alerts the officers responsible at once. AI is used for early warning, and a digital twin simulates the disaster response before it is needed.
Who it is for
- State and district disaster management authorities
- Water resources and irrigation departments
- Municipal corporations, for drains and urban flooding
- Highway and railway authorities in hill areas
- Reservoir operators
Before and after
What changes
The same job, today and with Ilonnati.
- Today: River level is read off a staff gauge by whoever is there. With Ilonnati: A radar sensor reports the level continuously, day and night, to within 2 mm.
- Today: A fast rise is noticed when the water reaches the road. With Ilonnati: The sensor raises an alarm on a sudden rise, as well as at the warning mark.
- Today: Slopes are inspected after heavy rain, if at all. With Ilonnati: Ground movement and slope stability are measured continuously on the slopes that matter.
- Today: A warning passes by phone call, from one officer to the next. With Ilonnati: The alert reaches every officer responsible for the area at once, by push, email and in the app.
- Today: Response plans are tested only when the disaster comes. With Ilonnati: A digital twin simulates the response, and the hazard map shows what lies in the water’s path.
How it works
From the reading in the field to the action on the screen, and back.
- 01
Sensors at the risk points
Radar level sensors over rivers, drains and reservoirs, and sensors and gauges on slopes known to move, each placed on a GIS hazard map.
- 02
Levels and movement report
Readings reach IoTyX through a long-range wireless gateway or the mobile network, and show on the map with their trend.
- 03
A warning mark is crossed
The river passes its warning level, or rises faster than it should, and the officers for that area are alerted at once.
- 04
Ground starts to move
Movement on a monitored slope crosses its threshold, and the hazard map shows the roads and homes below it.
- 05
Response, planned ahead
AI supports the early warning, and a digital twin simulates the disaster response, so plans are tested before the season, not during it.
- 06
The record
Every reading is kept with its place and time, for planning and for the review after an event.
What is measured
Each reading reaches IoTyX through the Ilonnati controller beside the equipment.
| Reading | What it tells you |
|---|---|
| River and flood level | Water height against its warning and danger marks; 0.3–12 m, ±2 mm |
| Rate of rise | How fast the water is coming up, often the first sign of a flash flood |
| Ground movement | Whether a slope, or the ground under a road or structure, has begun to shift |
| Slope stability | Whether a hillside is holding, from the sensors and gauges placed on it |
| Snow and ice cover | The extent of snow and ice, tracked through the season |
| Sensor tilt and blind zone | A sensor knocked out of line, or water risen too close to it to measure |
The rules and programmes behind it
Public programmes and rules that ask for this kind of measurement. Each links to the body that publishes it.
350
The Central Water Commission issues flood forecasts at 350 stations: 200 on major rivers and 150 at dams and barrages.
PIB, Lok Sabha reply, 11 March 202622,000
About 22,000 digital water level recorders send groundwater levels to central servers in real time.
PIB, Ministry of Jal Shakti, 2 April 2026
Industries where it applies
Each industry page sets out its equipment, its rules and the other use cases that run there.
Questions buyers ask
Ask about your own network, plant or campus. An engineer will reply.
Contact us01How is river level measured?
With a radar level sensor fixed on a wall or pole above the water. It does not touch the water, measures from 0.3 to 12 m to within ±2 mm, and is not affected by dust, condensation or temperature.
02Does the sensor need mains power?
No. It runs on its own battery: about seven years for the long-range wireless version and about five for the cellular one, when it reads every 15 minutes and reports once a day at 25 °C. Reporting more often uses the battery faster.
03Who receives the alerts?
The officers responsible for each area, set by role in IoTyX, by push notification, email and in the app.
04Can the sensor survive a flood?
It is rated IP68, tested at 1 m under water for 48 hours, and it raises an alarm when the water comes too close to measure.
