Measured in the field.Run from the control room.
Ilonnati makes the controller boards, valve actuators and high-voltage hardware beside the equipment, and IoTyX, the platform that shows each reading and sends commands back.
On the model
Hardware Ilonnati makes
Equipment it runs
The system
One chain, from the machine to the screen.
Valves, pumps, meters and sensors. The machines that move water, power and product.
One stands beside each machine. Inside is the board: terminals take in the sensors, relays switch the valve or pump, and a radio links it to the platform. Ilonnati makes these boards, and high-voltage hardware too.
An operator starts a pump or opens a valve from the mobile app, standing beside it or from across town. The controller confirms once it has happened.
On the web, the same platform fills a control room: every site on one map, with levels, flow and alerts on the screens. The room can be in a utility office or on a plant floor.
Use cases
Where it runs.
Reservoirs, pumping stations, valves and meters across a town, measured and run from the control room.
What it watches
- Reservoir and tank levels
- Flow and pressure
- Water quality
- Leaks, bursts, theft and tampering
Grid supply, solar, wind, batteries and generators in one view, down to the low-tension panel.
What it watches
- Grid, solar, wind and generator output
- Overcurrent and voltage deviation on low-tension (LT) panels
- Energy used per machine and per product
- Alerts on thresholds and trends
Kilns, crushers, conveyors, motors and gas lines, mirrored in real time by a digital twin of the plant.
What it watches
- Vibration, temperature, voltage and current
- Gas flow and consumption
- Energy per unit produced
- Predictive maintenance alerts
Soil, temperature and humidity sensors decide when the sprinklers and drip lines run, so a field gets the water it needs and no more.
What it watches
- Soil moisture, salinity and NPK
- Temperature and humidity
- Irrigation valves and pumps
- Water used per field
Tanks refill automatically, each flat’s water use is metered, and leaks inside the building are flagged.
What it watches
- Tank levels and automatic refilling
- Use per flat, for pay-per-use bills
- Leaks inside the building
- Drinking-water quality
Stations for air, water and soil, with drones for large-area surveys of rivers, forest and farmland.
What it watches
- Air: PM2.5, PM10, NOx, SO₂, CO₂, VOCs and noise
- Water: pH, turbidity, dissolved oxygen, BOD and COD
- Flood levels and ground movement
- Green cover and forest health
Where each vehicle is, what it burns and how it performs, with every asset on a site map.
What it watches
- Vehicle location and route
- Fuel consumption and performance
- Asset location and maintenance history
- A digital twin of the site
Scroll for the next use case. Callouts on the model are a simulated example.
One company, from the board to the screen
Ilonnati designs the hardware that goes on equipment in the field and the platform that runs it, so one team answers for the whole system.
- Based in
- Hyderabad
- A private limited company, incorporated in December 2020.
- Hardware
- Designed by Ilonnati
- Controller boards, valve actuators and high-voltage products.
- Platform
IoTyX- In a browser, on a phone and on a control room wall.
- Patent application
- Filed June 2022
- Smart Intelligent Water Monitoring, No. 202241033836, under examination.
- Recognised
- TBC Accelerator, 2025
- Selected for measuring water in pipelines and operating valves remotely.
Four areas, one platform
Each area has its own modules, on one platform. Scroll to see each in turn, or choose one.
Area 1 of 4, with 8 modules
From the reservoir to the consumer’s meter
Valves, pumps, reservoirs and meters across a network, measured and operated from the control room.
- Remote valve control
- Network monitoring
- Leak and loss detection
- Pump and reservoir automation
- Network map
- Control room
- Metering
- Reports
For water boards and municipal corporations; smart city and jal jeevan mission projects; town and rural water schemes.
Water and utilities, in fullOn a typical network
- Elevated reservoir
- Pump set
- Motorised valve
- Meter at each connection
- Ilonnati controller
Area 2 of 4, with 7 modules
Machines, energy and process water, watched as they run
Machines, energy, process water and vehicles on a site, watched remotely from one platform.
- Equipment monitoring
- Predictive maintenance
- Digital twin of the plant
- Energy monitoring
- Process water and effluent
- Site safety
- Vehicles and site assets
For cement, steel and process plants; pharmaceutical and chemical manufacturers; power producers and large energy users.
Industry and energy, in fullOn a typical site
- Rotary kiln
- Drive motor
- Substation
- Solar and wind
- Ilonnati controller
Area 3 of 4, with 7 modules
The running of a campus, on one platform
The day-to-day running of a campus or building, from the cafeteria to the water tanks, on one platform.
- Cafeteria plate counting
- Occupancy monitoring
- Food waste monitoring
- Laundry tracking
- Gas cylinder monitoring
- Water tanks and metering
- Reports
For corporate campuses and global capability centres; hospitals and large facilities; facility management companies.
Campuses and buildings, in fullOn a typical campus
- Rooftop tanks
- People counter
- Gas cylinder bank
- Sump pump
- Ilonnati controller
Area 4 of 4, with 7 modules
Air, water and soil, measured in the field
Air, water and soil measured in the field, with drones for areas too large to walk, and irrigation that follows the soil.
- Air quality
- Water quality
- Soil monitoring
- Irrigation control
- Forests and mines
- Flood and ground movement
- City environment
For pollution control boards and municipal bodies; forest, river and disaster management authorities; mining and industrial sites.
Environment and agriculture, in fullOn a typical site
- Air-quality station
- River buoy
- Soil sensors
- Flood level gauge
- Ilonnati controller
Hardware, designed by Ilonnati
Designed in Hyderabad, and fitted to the valves, pumps and machines already in the field.
- Controller boardsBoards that connect valves, pumps and sensors in the field to the IoTyX platform.
- Valve actuatorsFitted to the valves already in the ground, with no change to the pipes.
- Sensors and metersFlow, level, pressure, water quality, power and weather instruments, read by the controller and set up by Ilonnati.
- High-voltage hardwareIlonnati’s own high-voltage products, in production today.
- Designed in Hyderabad.
- Patent application 202241033836, filed June 2022, under examination.
| No. | Part | What it does |
|---|---|---|
| 1 | Enclosure | Stands outdoors, beside the machine it runs. |
| 2 | Rain hood | Covers the top of the enclosure. |
| 3 | Antenna | Carries the radio link to IoTyX. |
| 4 | Cable glands | Bring the cables in from the machine and its sensors. |
| 5 | Mounting plate | Carries the board, the power supply and the breakers. |
| 6 | Power supply | Powers the board. |
| 7 | Breakers | Protect the incoming supply. |
| 8 | Controller board | Made by Ilonnati. Connects the machine to IoTyX. |
| 9 | Terminal strip | Takes in the sensors. |
| 10 | Processor | Passes readings to the radio, and commands to the relays. |
| 11 | Radio module | Sends readings to IoTyX and receives its commands. |
| 12 | Relays | Switch the valve or pump. |
| No. | Part | What it does |
|---|---|---|
| Already in place | ||
| 1 | Pipe | Stays as it is: no change to the pipes. |
| 2 | Flanged joint | The valve’s joint to the pipe, left untouched. |
| 3 | Valve body | The valve already in the network. |
| 4 | Stem | Opens and closes the valve, now turned by the actuator. |
| Fitted by Ilonnati | ||
| 5 | Mounting bracket | Holds the actuator on the valve. |
| 6 | Coupling | Joins the actuator to the stem. |
| 7 | Motorised actuator | Opens and closes the valve remotely, on command or on a schedule. |
| 8 | Cable | Connects the actuator to the controller. |
| 9 | Ilonnati controller | Links the valve to IoTyX, where its state is shown. |
The platform

Ilonnati’s software platform. It runs the hardware in the field from a browser or a phone.
Live levels, flow, pressure and consumption across every site, on one map.
Open a valve to any position or start a pump from the screen. The device confirms each command, and every one is logged.
Leaks, overflow, pressure drops and devices that go offline, by push, email and in the app, with escalation if no one responds.
Pumping and valve operations on a timetable, and reports sent by email every day, week or month.
Live today at iotyx.io, and on Google Play.More on IoTyX










What is in IoTyX
The same platform in every area. Other businesses can run their own connected hardware on IoTyX, as a subscription.
Live monitoring
Levels, flow, pressure, consumption and water quality, and whether each device is online, as they change.
Remote operations
Valves set to any position and pumps started from anywhere. The device confirms each command, and each one is recorded with who sent it and when.
Two-person approval
An organisation can require a second person to approve a command before it reaches the field, and both names go on record.
Alerts
Leaks, continuous and reverse flow, overflow, consumption limits, devices offline, low battery, tampering and sensor faults, with thresholds set per sensor, by push notification, email and in the app.
Escalation and follow-up
An alert no one answers moves up to the next person after a set time. Alerts are acknowledged, taken up, snoozed and commented on, and quiet hours hold back what can wait.
Schedules and rules
Pumping and valve operations on a timetable, with timed supply to each zone, and rules that act on readings, such as stopping a pump when a tank is full.
Analytics and reports
Trends by the day, week, month and year, devices compared side by side, PDF reports, CSV exports of every reading, and reports sent by email on a schedule.
Live map
Devices and assets on a live map, with the network’s pipes, valves and zones drawn on it.
Organisations and roles
More than one site and organisation on one platform, access by role down to each device, group and zone, and assets shared with a contractor or partner.
Mobile app
The same platform on a phone, with push alerts and reports to share, for engineers and field staff.
In twelve languages
English, Hindi, Bengali, Telugu, Marathi, Tamil, Gujarati, Kannada, Malayalam, Punjabi, Odia and Assamese, on the web and in the app.
Built further on request
New features, readings, device types and reports are added for a project or an organisation, on request.
Designed for
- Municipal corporations and urban local bodies
- Water supply and sewerage boards
- Smart City and Jal Jeevan Mission projects
- Industrial plants and special economic zones
- Hospitals, campuses and large facilities
- Commercial buildings and residential communities
How a project runs
From the first conversation to every site, with one team throughout.
Four steps
- Tell us what you needThe sites, equipment or facilities involved, and what you want to see or control.
- A conversation with an engineerAn Ilonnati engineer reviews the requirement and proposes the hardware and the setup on IoTyX.
- A demonstration or a pilotSee it working, or run it on part of your network, plant or campus before committing to more.
- Scale and supportExtend to more sites on the same platform, with installation, training and maintenance from Ilonnati.
Fit to what is there
Where existing valves, pumps and machines can take them, controllers and actuators are fitted to what is already there.
One company, hardware to software
Ilonnati designs the boards in the field and the platform that runs them, so one team answers for the whole system.
Start small, then scale
A pilot on part of a network or site comes first, before it is extended to the rest.
Built and supported in India
Developed in Hyderabad, with installation, training and maintenance after installation.
With every project
- Advisory and planning
- Installation and deployment
- Managed services
- Support and training
- Maintenance
Where it has been deployed
A city water network and a technology campus. Each client is described by type until it approves being named.
Remote valve control in a city water network
Valves in urban water distribution, opened, closed and watched from the control room instead of by crews on the road.
- Before
- Valves were opened and closed by hand, by crews travelling to each one.
- After
- Operators open, close and schedule a connected valve without a site visit.
Measured operations for a technology campus
Cafeteria, occupancy, food waste, laundry and gas cylinders at a global capability centre, brought onto one platform.
- Before
- Little visibility of cafeteria footfall and what was eaten.
- After
- Meals served are counted automatically through the day.
Connections and security
Works with what is there. Records every command.
Every command is confirmed by the device and recorded with who sent it and when. For government projects, IoTyX can run on dedicated or on-premise servers.
What it connects to
- Ilonnati hardwareControllers and actuators, connected and set up by Ilonnati.
- Your own hardwareOther businesses can run their own connected hardware on IoTyX, as a subscription.
- Standard protocolsDevices report over MQTT, HTTP and CoAP, and LoRaWAN sensors through a gateway.
- Your network mapsExisting maps in KML or Shapefile are brought in at setup, and the network is drawn and edited on the map.
Security and data
- Two-step sign-in, with an authenticator app or a code by email
- Access by role, from owner to field staff, down to each device
- A record of every action, with who took it and when
- Each organisation’s data kept apart from every other
- Signed-in devices listed, and signed out from anywhere
- Data stored in India
- Dedicated or on-premise servers for government projects
Built to order
When a client needs something that is not on the shelf, Ilonnati designs the hardware and the software to the requirement, and delivers both. Ilonnati works with businesses, governments and consumers.
Cement
A digital twin of the plant: kilns, crushers and conveyors watched remotely.
Pharmaceuticals
Water-quality monitoring for the grades of water a pharma plant depends on.
Iron and steel
Measurement of the quantity and quality of cooling and process water.
Power and energy
Measurement and control of the fresh water a thermal plant uses for cooling.
Food and agriculture
Irrigation tied to soil moisture, temperature and humidity sensors.
Chemicals and fertilisers
Water measurement and effluent monitoring against discharge norms.
Transport
Water-quality monitoring with a public display at stations and bus stands.
Mining
Environmental monitoring of a mine site, with drones for erosion and dust.
Customers and partners
The government bodies Ilonnati counts as customers, and the incubators, accelerators, foundations and companies it is associated with.
Customers13

- Ministry of Jal Shakti


- Ministry of Electronics and Information Technology


- Ministry of Housing and Urban Affairs





Partners and programmes24








- Kimberly-Clark















Questions buyers ask
Ask about your own network, plant or campus. An engineer will reply.
Contact us01What is IoTyX?
IoTyX is the IoT platform of Ilonnati Innovations: it receives readings from controllers, meters and sensors in the field, shows them on a live map and dashboards, raises alerts, and sends commands back to valves and pumps, on the web, in an Android app and on a control room wall.
02Can the actuators fit our existing valves?
Where a valve is in working order, a motorised actuator is fitted to it with a bracket and coupling and wired to a controller beside it. A seized or damaged valve is repaired first.
03How does a project start?
With a conversation about the sites involved, then a demonstration or a pilot on part of the network or site. It is extended to the rest once the pilot has done what it was meant to.
04Who is IoTyX for?
Municipal corporations and urban local bodies, water supply and sewerage boards, Smart City and Jal Jeevan Mission projects, industrial plants and special economic zones, hospitals, campuses and large facilities, and commercial buildings and residential communities.
05How are commands kept safe?
Only authorised people can send a command. It is confirmed before it is sent, a second person can be required to approve it, the device confirms it when it is done, and it is recorded with who sent it and when.
06Where is the hardware designed?
In Hyderabad, where the company is based.
07Is there a patent?
Ilonnati has filed a patent application in India for Smart Intelligent Water Monitoring (No. 202241033836, June 2022), which is under examination.
08Can Ilonnati build hardware to our requirement?
Yes. When a client needs something that is not on the shelf, Ilonnati designs the hardware and the software to the requirement, and delivers both.

