Industry and energy
The cement plant as a live replica.
A digital twin of the plant mirrors its kilns, crushers and conveyors as they run, so engineers can watch them remotely, see a fault coming and try a process change before making it.
- In the field
- Ilonnati controllers and sensors
- On the screen
- IoTyX: web, phone, control room
On a typical site
- Rotary kiln
- Drive motor
- Substation
- Solar and wind
- Ilonnati controller
In short
A cement plant runs as one chain. Crushed limestone travels by conveyor to the raw mill, the kiln turns raw meal into clinker, and a stop at any machine holds up the rest. Ilonnati builds a digital twin of the plant: a virtual replica, fed by sensors on the kilns, crushers and conveyors, that mirrors the equipment and the process in real time. Engineers watch it from anywhere, see readings drift before a machine fails, and run diagnostics without travelling to site. Process changes are tried on the replica first, and the energy each machine uses is measured as it runs.
Who it is for
- Cement manufacturers
- Integrated plants and grinding units
- Plant heads and maintenance managers
- Process and reliability engineers
- Groups running several plants
Before and after
What changes
The same job, today and with Ilonnati.
- Today: The plant’s condition is known from rounds and the control room on site. With Ilonnati: The plant is mirrored on a live replica that engineers can open from anywhere.
- Today: A failing bearing or gearbox is found when the line stops. With Ilonnati: Readings that drift from a machine’s usual pattern raise an alert before it fails.
- Today: A specialist travels to the plant to diagnose a fault. With Ilonnati: Diagnostics and troubleshooting are run remotely; the visit is made when a repair needs hands.
- Today: A new process setting is tried on the running kiln, at its risk. With Ilonnati: The setting is tried on the replica first, to find the most efficient and productive one.
- Today: Power is known for the plant as a whole, from the monthly bill. With Ilonnati: Energy is measured per machine, so the heaviest users can be found and run better.
How it works
From the reading in the field to the action on the screen, and back.
- 01
Sensors on the equipment
Vibration, temperature and electrical readings from the kiln drive, crushers, conveyors and mill motors reach IoTyX through controllers on site.
- 02
The replica runs live
The digital twin mirrors each machine and the process in real time, so the plant can be opened from a control room or a laptop anywhere.
- 03
A reading drifts
Vibration on a conveyor drive rises above its usual pattern, and the maintenance team is alerted with the machine and its trend.
- 04
Diagnosed from afar
A technician studies the history and runs diagnostics remotely, and the drive is serviced at the next planned stop.
- 05
A change tried first
Before a process setting is changed on the plant, it is tried on the replica to see its effect on output and energy.
- 06
Energy per machine
What each machine uses is measured as it runs and set against what the plant produced.
What is measured
Each reading reaches IoTyX through the Ilonnati controller beside the equipment.
| Reading | What it tells you |
|---|---|
| Vibration | A developing fault in a drive, bearing or gearbox, before it stops the line |
| Temperature | Bearings, motors and gearboxes running hotter than they should |
| Voltage and current | How hard each motor is working, and electrical trouble as it starts |
| Power per machine | Which machines use the most energy, against what the plant produced |
| Running state | Which crushers, conveyors and mills are running, stopped or idling |
The rules and programmes behind it
Public programmes and rules that ask for this kind of measurement. Each links to the body that publishes it.
1,333
Under the PAT scheme, 1,333 large energy users in 13 sectors have energy-saving targets; in 2022–23 they saved 25.77 million tonnes of oil equivalent.
PAT scheme, PIB, Ministry of Power, 29 July 202417
CPCB requires the 17 most polluting industry categories, with common effluent and sewage treatment plants, to stream effluent and emission readings to CPCB and the State Board in real time.
CPCB, real-time effluent monitoring guidelines, 2014
Industries where it applies
Each industry page sets out its equipment, its rules and the other use cases that run there.
Questions buyers ask
Ask about your own network, plant or campus. An engineer will reply.
Contact us01What is a digital twin of a cement plant?
A virtual replica of the plant that mirrors its equipment and process in real time, fed by sensors on the machines. Engineers use it to watch the plant remotely, to see where readings are drifting, and to try process changes before making them.
02Which equipment does it cover?
Kilns, crushers and conveyors, and the motors that drive the plant’s mills and fans. A pilot can start with the few machines whose failure costs the most, and grow from there.
03Can a fault be diagnosed without going to the plant?
Yes. Technicians run diagnostics and troubleshooting remotely, from the replica and the machine’s history, and travel when a repair needs hands on the machine.
04Does it replace the plant’s control system?
No. It is designed around what the plant already runs. What it watches, and whether it may switch anything, is agreed for each project.
