Contact us

Industries: Cement

A cement plant, from crusher to kiln, on one screen.

Sensors on the machines that keep a cement line running, a digital twin to watch and test the plant remotely, and energy measured where the plant uses most of it.

Use cases
6 described below
To start
A pilot at one site
Illustration of an industrial site: a plant hall, a rotary kiln on its piers, cement silos and a conveyor, a substation with two transformers, a solar array and a wind turbine, with an Ilonnati controller beside each.

On a typical site

  1. Rotary kiln
  2. Drive motor
  3. Substation
  4. Solar and wind
  5. Ilonnati controller

In short

A cement plant is one long chain. Limestone is crushed and conveyed, ground in the raw mill, burned in the kiln into clinker, and the clinker ground with gypsum into cement; a stop at any machine holds up everything after it. Ilonnati builds a digital twin of the plant from sensors on its kilns, crushers and conveyors, so engineers watch it remotely, see a failure coming and try process changes on the replica first. Energy is measured per machine, including the mills and fans, and dust and worker safety are measured across the site.

Why it is hard

The challenges

What makes cement hard to run without live measurement.

What Ilonnati runs here
  • Unplanned stops

    A kiln, crusher or conveyor that fails without warning stops the line behind it, and bringing a kiln back up costs time, fuel and output.

  • Maintenance by calendar

    Machines are serviced on a schedule or after they fail, not on their condition, so some are opened too early and others too late.

  • Expertise far from the plant

    Plants sit near their quarries, often far from cities, so diagnosing a fault can wait for a specialist to travel.

  • A power-hungry process

    Grinding and burning use large amounts of power and fuel, and without per-machine figures it is hard to say where to save.

  • Changes that carry risk

    Trying a new setting on a running kiln puts output and quality at risk, so changes are made slowly, or not at all.

What Ilonnati measures and runs

Ilonnati controllers and sensors on the equipment, IoTyX on the screen.

  • Kiln

    Vibration and temperature on the kiln drive, mirrored on the digital twin, so a developing fault is seen before production stops.

  • Crushers

    Vibration, temperature and motor current on the crushers that feed the line, where shocks and overloads are part of the job.

  • Conveyors

    Drive motors and gearboxes on the belts that carry material between stages, watched for the signs that come before a stop.

  • Mills and fans

    Power, current and vibration on the motors that drive the mills and fans, among the plant’s largest.

  • Energy per tonne

    Energy from the grid, solar or the plant’s own generators, set against output, to give the power used per tonne of cement.

  • Dust and site safety

    PM2.5 and PM10 at the plant boundary, with gas, noise and worker exposure measured where people work.

The rules and programmes behind it

Public programmes and rules that ask for this kind of measurement. Each links to the body that publishes it.

Questions buyers ask

Not answered here?

Ask about your own network, plant or campus. An engineer will reply.

Contact us
01What can be monitored in a cement plant?

Kilns, crushers and conveyors, and the motors that drive the mills and fans: their vibration, temperature, voltage and current, with the energy each machine uses.

02What does the digital twin add?

A live replica of the plant that engineers can open from anywhere. It shows where readings are drifting, supports remote diagnostics, and lets process changes be tried virtually before they are made.

03Can it start with one line?

Yes. A pilot can start with the machines whose failure costs the most, such as the kiln drive or the main crusher, and grow from there.

04Does it work with the plant’s control system?

It is designed around what the plant already runs. What IoTyX watches, and what it may switch, is agreed for each project.

Related industries

The same hardware and the same platform, set up for other sites in industry and energy and beyond.

Tell us what you need to connect, monitor or control

An engineer will reply.