Contact us

Industry and energy

Find the fault before the machine stops.

Sensors on the pumps, motors and HVAC plant that matter most report vibration, temperature, voltage and current as they run, and a reading that drifts raises an alert in time to plan the repair.

In the field
Ilonnati controllers and sensors
On the screen
IoTyX: web, phone, control room
Illustration of an industrial site: a plant hall, a rotary kiln on its piers, cement silos and a conveyor, a substation with two transformers, a solar array and a wind turbine, with an Ilonnati controller beside each.

On a typical site

  1. Rotary kiln
  2. Drive motor
  3. Substation
  4. Solar and wind
  5. Ilonnati controller

In short

Most plants still service machines on a calendar, or after they fail. Ilonnati fits sensors to the machines whose failure costs the most, such as pumps, motors, compressors and HVAC plant, and a controller on site sends their vibration, temperature, voltage and current to IoTyX as they run. Anomaly detection, using machine learning, flags readings that move away from each machine’s normal pattern. Power drawn is compared with the machine’s rated capacity, to show which machines run inefficiently. Alerts and remote diagnostics let the maintenance team plan the work for a scheduled stop, and each machine’s history stays on record.

Who it is for

  • Maintenance and reliability managers
  • Process and manufacturing plants
  • Water pumping stations
  • Facility teams running HVAC plant
  • Power producers

Before and after

What changes

The same job, today and with Ilonnati.

  1. Today: Machines are checked on rounds, and a fault is found when something stops. With Ilonnati: Vibration, temperature, voltage and current arrive continuously from each monitored machine.
  2. Today: Servicing follows the calendar, whether the machine needs it or not. With Ilonnati: Servicing follows each machine’s condition, and is planned for a scheduled stop.
  3. Today: A motor drawing more than it should goes unnoticed. With Ilonnati: Power drawn is compared with rated capacity, so an inefficient machine stands out.
  4. Today: A specialist travels to site to find out what is wrong. With Ilonnati: The alert arrives with the trend behind it, and the first diagnosis is made remotely.
  5. Today: Each machine’s history lives in registers and in people’s memory. With Ilonnati: Each machine’s readings, alerts and repairs are kept on record in one place.

How it works

From the reading in the field to the action on the screen, and back.

  1. 01

    Choose the machines

    The pilot starts with the machines whose failure costs the most: a main pump, a compressor, a critical motor or an HVAC chiller.

  2. 02

    Sensors and a controller

    Vibration and temperature sensors go on the machine, electrical readings come from its panel, and a controller on site sends them to IoTyX.

  3. 03

    A normal pattern forms

    Readings build up over normal running, and anomaly detection learns what usual looks like for each machine.

  4. 04

    A reading moves away

    A pump’s bearing temperature climbs above its pattern over several days, and the maintenance team is alerted with the trend.

  5. 05

    Repair on a plan

    The pump is inspected at the next planned stop, the bearing is replaced, and the work is recorded against the machine.

What is measured

Each reading reaches IoTyX through the Ilonnati controller beside the equipment.

ReadingWhat it tells you
VibrationImbalance, misalignment and bearing wear, building up before a breakdown
TemperatureA bearing, winding or casing running hotter than it should
VoltageA sagging or unbalanced supply that strains a motor
CurrentHow hard the machine is working, and changes in load as a fault develops
Power against rated capacityMachines running inefficiently, or far from the duty they were sized for
Running hoursHow long each machine has run since its last service

Industries where it applies

Each industry page sets out its equipment, its rules and the other use cases that run there.

Questions buyers ask

Not answered here?

Ask about your own network, plant or campus. An engineer will reply.

Contact us
01Which machines can be monitored?

Pumps, motors, compressors and HVAC plant, and process equipment such as kilns, crushers and conveyors.

02How does it tell that a fault is developing?

Each machine’s vibration, temperature, voltage and current are learned over normal running. Anomaly detection flags readings that move away from that pattern, and the alert carries the trend, so the team can judge how urgent it is.

03What is fitted to each machine?

Sensors for vibration and temperature on the machine, and meters for voltage and current at its panel, both wired to a controller on site.

04Where do the alerts go?

To the people responsible for the machine, by push notification, email and in the IoTyX app. Thresholds are set per sensor.

Tell us what you need to connect, monitor or control

An engineer will reply.