Industry and energy
Each grade of water, held to its standard.
Quality probes where each grade of water is made, stored and used, every reading kept with its time and place, and an alert the moment a reading leaves its band.
- In the field
- Ilonnati controllers and sensors
- On the screen
- IoTyX: web, phone, control room
On a typical site
- Rotary kiln
- Drive motor
- Substation
- Solar and wind
- Ilonnati controller
In short
Water is one of the main utilities in a pharmaceutical plant. It goes into products as an excipient, reconstitutes them, takes part in synthesis, and rinses vessels, equipment and primary packaging. Each use calls for a grade: Water for Injections for parenteral medicines, Purified Water for medicines that need not be sterile and free of pyrogens, and water for preparing drug extracts. Ilonnati measures the quality of each grade continuously where it is made, stored and used, and IoTyX keeps every reading with its time and place. A reading that leaves its band raises an alert, so the quality team can act before the water is used.
Who it is for
- Pharmaceutical manufacturers
- Quality assurance and control teams
- Engineering and utilities managers
- Formulation and API plants
- Contract manufacturers
Before and after
What changes
The same job, today and with Ilonnati.
- Today: Water quality is known from samples taken to the laboratory. With Ilonnati: Quality is measured continuously where each grade is made and used.
- Today: A drift between samples goes unseen until the next result. With Ilonnati: A reading that leaves its band raises an alert as it happens.
- Today: Readings are written in logs beside each instrument. With Ilonnati: Every reading is kept with its time and place, ready for review.
- Today: How much water each process uses is estimated. With Ilonnati: Flow to each point of use is metered, so use is known by process.
- Today: Calibration dates are tracked on a spreadsheet. With Ilonnati: pH instruments keep their calibration history and remind the team when the next is due.
How it works
From the reading in the field to the action on the screen, and back.
- 01
Points chosen per grade
With the plant’s quality team, points are chosen where each grade is generated, stored and drawn for use.
- 02
Probes installed
Conductivity, pH and other probes go in at those points, each measuring temperature for compensation, wired to a controller.
- 03
Limits set
Each reading is given the limits its grade allows, and each alert goes to the person responsible for that water system.
- 04
A continuous record
Readings reach IoTyX as they are taken and are kept with their time and place, for review.
- 05
A reading drifts
Conductivity on the Purified Water loop rises towards its limit; the alert goes out, and the loop is checked before water is drawn for the next batch.
What is measured
Each reading reaches IoTyX through the Ilonnati controller beside the equipment.
| Reading | What it tells you |
|---|---|
| Conductivity | Dissolved ions in the water, the first sign that purification is slipping |
| pH | Whether the water has turned acid or alkaline |
| Total dissolved solids | Salts left in the water after treatment |
| Temperature | The condition each reading was taken in, for compensation and the record |
| Residual chlorine | Chlorine in the incoming water, which treatment must remove before purification |
| Turbidity | Particles in the feed water before it is treated |
| Flow to each point of use | How much of each grade every process draws |
The rules and programmes behind it
Public programmes and rules that ask for this kind of measurement. Each links to the body that publishes it.
17
CPCB requires the 17 most polluting industry categories, with common effluent and sewage treatment plants, to stream effluent and emission readings to CPCB and the State Board in real time.
CPCB, real-time effluent monitoring guidelines, 2014
Industries where it applies
Each industry page sets out its equipment, its rules and the other use cases that run there.
Questions buyers ask
Ask about your own network, plant or campus. An engineer will reply.
Contact us01Which grades of water does it cover?
Water for Injections, Purified Water and water for preparing drug extracts, each monitored against the quality requirements of its grade.
02Does it replace laboratory testing?
No. Continuous readings show how the water behaves between samples; the plant’s laboratory testing, including its microbiological tests, goes on as before. Which parameters are measured online is agreed with each plant.
03Are the readings kept on record?
Yes. Every reading is kept with its time and place, and any command sent from IoTyX is recorded with who sent it and when.
04How are the probes calibrated?
The digital probes store their own calibration, so a probe can be calibrated in the laboratory and swapped on site. pH instruments keep their last five calibrations with dates, and can remind the team when the next is due.
