Contact us

Industries: Housing communities

For the communities that run their own water.

Apartment societies and gated communities buy, store and pump their own water. Ilonnati automates the tanks, meters each home and flags leaks, on one screen for the committee.

Use cases
4 described below
To start
A pilot at one site
Illustration of a campus: two office towers with water tanks on their roofs, a cafeteria with a people counter over its door, a laundry block, a caged bank of gas cylinders and the pump that fills the tanks, with Ilonnati controllers.

On a typical site

  1. Rooftop tanks
  2. People counter
  3. Gas cylinder bank
  4. Sump pump
  5. Ilonnati controller

In short

A housing community is a small water utility. It takes water from the municipal supply, borewells and tankers, stores it in sumps, pumps it to rooftop tanks and shares the cost among residents. Ilonnati puts level sensors in the sump and tanks and a controller on the pumps, so tanks refill on their own level and pumps do not run dry. A meter at the inlet shows what was received, and a meter at each flat or house shows what it uses, for pay-per-use bills. Leaks inside a flat or block raise an alert, and drinking-water quality can be measured at the sump.

Why it is hard

The challenges

What makes housing communities hard to run without live measurement.

What Ilonnati runs here
  • Pumps run by the watchman

    Tanks are filled when someone remembers or complains, so they overflow on some days and run dry on others.

  • Bills that do not follow use

    Water costs are shared by flat size or equally, so a household pays the same whatever it uses.

  • Leaks no one sees

    A running cistern or a leaking line inside a block wastes water for weeks before anyone notices.

  • Water bought by the tanker

    Where supply falls short, tankers fill the gap, and what each one delivered is taken on trust.

  • Drinking-water quality

    Water from borewells and tankers varies, and residents have no reading of what reaches their taps.

What Ilonnati measures and runs

Ilonnati controllers and sensors on the equipment, IoTyX on the screen.

  • Sump and tank levels

    Radar sensors in the sump and each rooftop tank, wireless and on their own battery.

  • Water received

    The inlet meter records what the mains, borewells and tankers deliver.

  • Use per home

    A meter at each flat or house, for pay-per-use bills and each household’s own view of its use.

  • Leaks

    Flow that never stops in a flat or block raises a leak alert.

  • Drinking-water quality

    pH, TDS and residual chlorine at the sump or the inlet.

  • Pumps

    Each pump’s state and running hours, started and stopped on the tank’s level.

Questions buyers ask

Not answered here?

Ask about your own network, plant or campus. An engineer will reply.

Contact us
01Can residents see their own use?

Yes. Flat and house owners can be given access to their own readings and notifications, while the committee sees the whole community.

02Do the tank sensors need cables?

No. The radar level sensor is wireless and runs on its own battery, around seven years when it reports once a day, and a gateway on site gathers its readings.

03Is it only for apartment blocks?

No. Row houses and villa communities use the same metering for each house’s use and leak alerts.

Related industries

The same hardware and the same platform, set up for other sites in campuses and buildings and beyond.

Tell us what you need to connect, monitor or control

An engineer will reply.