Contact us

Industry and energy

The whole site, open on one screen.

A real-time virtual replica of the site, its assets placed on a map with their location and maintenance history, and a 360° walk-through so an inspection need not mean a journey.

In the field
Ilonnati controllers and sensors
On the screen
IoTyX: web, phone, control room
Illustration of a vehicle depot and a works site: trucks with Ilonnati trackers on their cabs, a fuel point, a workshop, a site office, a generator and an excavator, with Ilonnati controllers.

On a typical site

  1. Tracker on each vehicle
  2. Fuel point
  3. Generator
  4. Equipment on site
  5. Ilonnati controller

In short

On a large site, knowing what is where, and what state it is in, usually means walking it. Ilonnati builds a digital twin of the site: a virtual replica, kept current in real time, used to watch operations and to simulate changes before they are made. Every asset, from pumps and panels to vehicles and plant, is placed on a geospatial map with its location and maintenance history. A 360° virtual walk-through lets an engineer, a manager or a client inspect the site remotely, so fewer visits are needed, and those that are made are better prepared.

Who it is for

  • Large industrial sites and yards
  • Construction and infrastructure projects
  • Asset and maintenance managers
  • Owners with sites across a region
  • Project heads who inspect remotely

Before and after

What changes

The same job, today and with Ilonnati.

  1. Today: What is where on site lives in drawings and people’s memory. With Ilonnati: Every asset sits on a map of the site, with its location and maintenance history.
  2. Today: An inspection means a journey to site. With Ilonnati: A 360° walk-through lets the site be inspected remotely; visits are kept for what needs one.
  3. Today: A change to the layout or the process is tried on the site itself. With Ilonnati: Changes are simulated on the replica first, and the best option is taken to site.
  4. Today: A machine’s repair record sits in a file at the site office. With Ilonnati: Open an asset on the map, and its maintenance history is there.

How it works

From the reading in the field to the action on the screen, and back.

  1. 01

    The site captured

    The site is surveyed and built as a virtual replica, with imagery for the 360° walk-through.

  2. 02

    Assets placed

    Each asset is placed on the site map with its location, its details and its maintenance history.

  3. 03

    Live readings added

    Where an asset is monitored, its readings join the replica, so the map shows its state as well as its place.

  4. 04

    Inspected remotely

    An engineer walks the site in 360° from the office, notes what needs attention, and plans the visit around it.

  5. 05

    Changes tried first

    A change to the layout, or to the way the site runs, is simulated on the replica before it is made on the ground.

What is measured

Each reading reaches IoTyX through the Ilonnati controller beside the equipment.

ReadingWhat it tells you
Asset locationWhere each asset is on the site, on a geospatial map
Maintenance historyWhat was done to each asset and when, so the next service is planned
Asset conditionLive readings from monitored equipment, shown at its place on the map
Site imageryWhat the site looks like now, walked through in 360° from anywhere
Vehicle positionsWhere site vehicles are, on the same map as the assets

Industries where it applies

Each industry page sets out its equipment, its rules and the other use cases that run there.

Questions buyers ask

Not answered here?

Ask about your own network, plant or campus. An engineer will reply.

Contact us
01What is a digital twin of a site?

A real-time virtual replica of the site, used to watch it, to simulate changes and to choose the best way to run it before anything is changed on the ground.

02What does the asset map hold?

Each asset’s position on a geospatial map of the site, with its maintenance history. Monitored assets show their live readings too.

03What is the 360° walk-through for?

Remote inspections. An engineer or manager walks the site on screen, so fewer journeys are needed and those that are made are planned.

04Can existing site maps be used?

Yes. Maps in KML or Shapefile are brought in when the site is set up, shown with the live readings, and can be edited on the map afterwards.

Tell us what you need to connect, monitor or control

An engineer will reply.