Environment and agriculture
Every reading checked against its limit.
Sensors at the boundary and the outlet measure around the clock, each reading is checked against its compliance limit as it arrives, and a map keeps the record of where and when.
- In the field
- Ilonnati controllers and sensors
- On the screen
- IoTyX: web, phone, control room
On a typical site
- Air-quality station
- River buoy
- Soil sensors
- Flood level gauge
- Ilonnati controller
In short
Environmental standards are getting stricter, and a site that relies on inspections and laboratory reports learns of a breach long after it happened. Here the sensing runs around the clock, at the points the limits apply to: air at the boundary, effluent at the outlet, noise where people live and work. AI checks each reading against its compliance limit as it arrives, and the responsible officer is alerted when a reading crosses its limit or trends towards it. Every reading is kept on a GIS map with its place and time, a record that can be checked, for compliance reports and ESG goals.
Who it is for
- Factories and process plants
- Mines
- Industrial parks and SEZs
- Sewage and effluent treatment plants
- Pollution control boards and municipal bodies
Before and after
What changes
The same job, today and with Ilonnati.
- Today: Samples go to a laboratory, and the report comes back days later. With Ilonnati: Readings arrive continuously and are checked against their limit as they come in.
- Today: A breach is found at the next inspection. With Ilonnati: A reading trending towards its limit alerts the responsible officer before it is crossed.
- Today: Limits are checked by someone reading a spreadsheet. With Ilonnati: AI checks every reading against the limit that applies at that point.
- Today: Proof of compliance is a file of past reports. With Ilonnati: Each reading sits on a map with its place and time, a record that can be checked.
- Today: ESG figures are gathered once a year from scattered sources. With Ilonnati: Daily, weekly and monthly reports come from the same continuous record.
How it works
From the reading in the field to the action on the screen, and back.
- 01
Points that matter
Sensors go where the limits apply: air at the boundary, effluent at the outlet, noise at the nearest homes, agreed before installation.
- 02
Around the clock
Readings reach IoTyX continuously, each with its place and time, through an Ilonnati controller or the station’s own link.
- 03
Checked against limits
AI checks each reading against its compliance limit, and against the trend of the readings before it.
- 04
An alert before a breach
Effluent pH drifting towards its limit alerts the plant’s environment officer by push, email and in the app.
- 05
On the map
Every point shows on a GIS map with its readings and status, so the whole site’s position is seen at once.
- 06
Reports
Daily, weekly and monthly reports from the same record, for the regulator, the board and ESG goals.
What is measured
Each reading reaches IoTyX through the Ilonnati controller beside the equipment.
| Reading | What it tells you |
|---|---|
| PM2.5 and PM10 | Dust and fine particles at the site boundary |
| NO₂, SO₂ and CO | Combustion gases at the boundary, from the same air station |
| Noise | Sound level at the boundary, by hour, day and night |
| Effluent pH | Whether discharge is too acidic or too alkaline to release |
| Turbidity and conductivity | Suspended and dissolved solids in water leaving the site |
| BOD and COD | The organic load in effluent, against its discharge limit |
| Discharge flow | How much leaves the site, to set the load against the limit |
The rules and programmes behind it
Public programmes and rules that ask for this kind of measurement. Each links to the body that publishes it.
17
CPCB requires the 17 most polluting industry categories, with common effluent and sewage treatment plants, to stream effluent and emission readings to CPCB and the State Board in real time.
CPCB, real-time effluent monitoring guidelines, 201485%
An industry must keep 85% of its monitoring data reaching CPCB every month, for every station and parameter.
CPCB, policy for real-time data collection40 µg/m³
India’s National Ambient Air Quality Standards cover 12 pollutants; the annual limit for PM2.5 is 40 µg/m³.
National Ambient Air Quality Standards, CPCB, 2009
Industries where it applies
Each industry page sets out its equipment, its rules and the other use cases that run there.
Questions buyers ask
Ask about your own network, plant or campus. An engineer will reply.
Contact us01What is checked against limits?
Every reading the site measures: air at the boundary, effluent at the outlet, noise, and any other point fitted with a sensor. The limit for each point is set in IoTyX when it is installed.
02Who is alerted?
The officers responsible for each point, set by role, by push notification, email and in the app, when a reading crosses its limit or trends towards it.
03How is the record kept?
Every reading is stored with its place and time and shown on a GIS map, so the site’s position at any moment can be looked up later. IoTyX stores its data in India.
04Does it cover more than one site?
Yes. IoTyX holds more than one site and organisation, with access by role, so a group sees every plant and each plant team sees its own.
